User Manual

BLOCK DIAGRAM

INTRODUCTION

GETTING STARTED

(1) Please check the AC voltage available in your country before connecting your

to the AC socket;

(2) Be sure that the main power switch is turned off before connecting to the AC socket.

Also you should make sure that all input and output controls are turned down. This will

avoid damage to your speaker and avoid excessive noise.

(3) Before turn on the you should connect it to a power amplifier and turn on

the mixer BEFORE the power amplifier. Once you have finished your working

you shall turn the mixer off AFTER the power amplifier.

(4) Before disconnecting the always turn off the power switch.

(5) Do not use solvents to clean your . A dry and clean cloth will be OK.

session

preamplifier

Thank you very much for expressing your confidence in our products by purchasing this

mixer pre amplifier. The is a professional compact preamplifier. You will get

smooth, accurate more natural and open sound from this apparatus, and it is really ideal

for gigs, recording and fixed PA installations.

This is very easy to operate but we advise you to go through each section of this

manual carefully. In this way you will get the best out of this .

preamplifier

pre amplifier

mixer preamplifier

This is designed for professional application with following

features:

mixer preamplifier

Features:

MONO channels:

6 COMBO inputs

MIC, MIC with Phantom power, LINE switch selector.

Low-distortion MIC pre-amp with high dynamic range, Balanced XLR and TRS input jacks.

Phantom power on each MIC input channel.

CH level control, SIGNAL LED to indicate input signal.

MIC 1 PRIORITY MUTE potentiometer

MIC OUT for monitoring CH1-CH6 output and MIC/LINE SWITCH control, LEVEL

to change output signal

STEREO channels

CH7/8, CH9/10, CH11/12 RCA inputs

Input level control, input signal LED

STEREO LINE OUTPUT, balanced XLR for mixing LEFT/RIGHT output

MONO OUTPUT and level control

STEREO REC OUT, RCA for mixing L/R OUT

3-BAND EQ for LOW, MID, HIGH

MASTER level controls the main output level, output signal LED

4-segment signal level meters, using master level to control LINE OUTPUT signal

PROFESSIONAL MIXER PREAMPLIFIER