User Manual

35. Control Room knob
This knob controls the overall output level for control room.
36. HP1-2 knob
These knobs control the overall output level for headphones.
37. Main control knob
This knob here controls the overall output level for main channel.
38. Combo Jack
The Combo Jack Inputs integrates Mic and Line in together, insert in the middle hole to get Line
in function, while insert in the edge circle to achieve the Mic function.
The T2208 equips 16 microphone preamplifiers for use with all types of microphones.
The preamplifier has a Class A input buffer which followed by a dual-servo gain stage. This
arrangement will bring ultra-low noise and wide gain control which help to boost signals without
increasing unwanted background noise.
The line-level input is a 1/4-inch, balanced TRS connector. Each channel of the T2208 has a
line-level input. The microphone-preamp circuit will be bypassed if the Line-level Input has been
engaged.
Note: Please notice that there will be a momentary spike in the output when plugging in a
microphone or a line-level input device, or turning phantom power on or off. So it should be
better to mute or turn down the channel fader before changing connections or turning phantom
power on or off.
Control
5.2 Rear panel
35
36
36
30
37
38
39
40
41
42
43 44
45
46
47
48
49
50
17
5