User Manual

ManualsBrandsTopp Pro ManualsDigital MixersT2208

DSP Control

The DSP control part is the most important part of T2208. In this part you can adjust Gate,

Compressor, EQ, polarity, panning, delay, link, routing, etc. for the selected channel.

Here is the table lists each input/output channel that with DSP function.

6.1 Mixer interface

Once you turn on the T2208 switch, the Mixer interface will come to your eyes at first if you have

preseted, now let’s see what you can get in this interface.

Touch a channel, for example, CH01, the background and corresponding CH1 button

will illuminate synchronously, you can control the output signal level by Parameter

Adjust knob.(Please notice pan button should not be lit, or the Parameter Adjust knob

controls the pan)

Bus

Inputs

(CH1-16)

Inputs

(CH17-20)

Aux

sends1-8

FX1-2

MAIN Out

Gate Compressor EQ Polarity Pan Delay Link Output Assignment

MAIN, AuX Sends

1-8, FX 1-2

MAIN, AuX Sends

1-8, FX 1-2

MAIN

√ √ √ √ √ √

√ √ √ √ √ ×

√ √ √ × √ √

√ √ √ √ √

× √ √ √ × √ ×

√

Name

Main

-10.5dB

0000000

0000

0 0

0000000

-10dB

000

-10dB -10dB -10dB

000

-10dB -10dB -10dB

-10dB

DCA

Mute Mute

Name

Main

-10.5dB

CH01

-10.5dB

CH01

Solo

Long Fader

DCA 1 DCA 2

DCA 3 DCA 4

DCA 5 DCA 6

Ch11Ch10Ch09

Aux5 Aux6

Aux7 Aux8

Aux1

Aux3

Aux4Aux2

FX1 FX2

Ch19-20

Ch12 Ch15Ch14Ch13

Ch02 Ch08Ch07Ch06Ch05Ch04Ch03

Ch16

Ch01

USBCh17-18

-10dB

Ch01