User Manual

DSP Control
When switch to AUX 5-8, the corresponding page is as below picture show, this function enable
output assignments to be more.
Touch AUX5-8 and FX1-2 on the LCD screen to assign input channel audio to these channels or
buses. To adjust output level of the channel audio, you can rotate Parameter Adjust knob on the
panel.
For other icon functions in this page, they are the same with those in AUX1-4 mode.
Solo
Mute
CH08
-10.5dB
CH08
Assign
FX1
AUX6 AUX8AUX5
FX2
AUX7
-10.5dB -10.5dB -10.5dB -10.5dB -10.5dB -10.5dB
Sends
PRE PRE PRE PRE
Load
Save
DCA Assign
DCA 1 DCA 2 DCA 3
DCA 4 DCA 5 DCA 6
POST POST
Select
Channel
Left
Right
Pan
Parameter
Aux 1
-10.5dB
48V
Phase
Main
AUX1-4 AUX5-8
Link
Copy
Channel
Bank Select
Left
Bank Select
Right
Long
Faders
All Faders
DCA
Assign
Channel
Gate
Comp
PEQ
GEQ
FX 1
FX 2
Routing
System
EQ
FX1
AUX6 AUX8AUX5
FX2
AUX7
-10.5dB -10.5dB -10.5dB -10.5dB -10.5dB -10.5dB
PRE PRE PRE PRE POST POST
24
6