User Manual

6.10 Digital Input interface
Only channel 1-16 are given digital input. You can select which channels input from option
module, and which channels input from analog.
The screen will give clues if no digital card inserted in, and the Digital in function can not enable
either.
Touch this icon to switch between Digital Input and Digital Output page.
This symbol enables you to choose digital input channels, touch the switch OFF, it will
turn to ON and illuminate, which means this selected channel can input digital signal.
When you choose a digital assign channel, you can adjust its input level by sliding this
long fader on the screen or by rotating Parameter Adjust knob on the panel.
DSP Control
Parameter
CH01
-20.0dB
CH01
-20.0dB
CH09 CH10 CH16CH11 CH12 CH13 CH14 CH15
CH02
-20.0dB
CH03
-20.0dB
CH04
-20.0dB
CH05
-20.0dB
CH06
-20.0dB
CH07
-20.0dB
CH08
-20.0dB
-20.0dB -20.0dB -20.0dB -20.0dB -20.0dB -20.0dB -20.0dB -20.0dB
-20.0dB
CH17-18
-20.0dB
CH19-20
Bank Select
Left
Bank Select
Right
Long
Faders
All Faders
DCA
Assign
Channel
Gate
Comp
PEQ
GEQ
FX 1
FX 2
Routing
System
EQ
OFF
OFF
OFF OFF
OFF OFF OFF OFF OFF OFF OFF
OFF OFF OFF OFF OFF OFF OFF
Channel Mapping
Digital Output
Digital Input
Bank Select
Left
Bank Select
Right
CH01
-20.0dB
OFF
Parameter
CH01
-20.0dB
34
6