MX.3BT 2TK MX 3BT 2TK BT NF03852-1.
MX SER IES The mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
MX SER IES 1. INTRODUCTION.................................................................4 2. FEATURES..........................................................................4 3. INSTRUCTION....................................................................4 4. CONTROL ELEMENTS.........................................................5 5. CONNECTING DIAGRAMS..................................................9 6. WIRING CONNECTION......................................................10 7. BLOCK DIAGRAM..
MX SER IES Thank you for purchasing the TOPP PRO MX.3BT compact portable mixer. MX.3BT mixer features super mini size but equipped with powerful functions. Please carefully read this manual before installation and operation. Thank you again for choosing TOPP PRO MUSIC GEAR products. * 1 mic input channels with XLR and balanced line input. * 1 stereo input channels with RCA jack. * Ultra-low noise discrete Mic Preamps with +20V Phantom Power. * 2-band EQ (Warm, natural) in mono and stereo channels.
MX SER IES 2TK MX 3BT 2TK BT MAIN 2TK 1 2 This device contain FCC ID:KKI-F-3088 5 2TK 8 4 3 6 7 9 17 16 MX 3BT 10 19 2TK BT 11 18 MAIN 2TK 20 12 22 13 14 21 15
MX SER IES 1- USB PORT This Type B USB port can be used to connect the computer via Type B to A connector. 2TK MX 3BT 2- POWER SWITCH To turn on/off the unit. 3- POWER LED This LED will light up when the unit is powered on. 4- MIC/LINE IN JACK This combined jack can be used to connect mono signal, such as XLR microphone or 1/4" line level. *Note: Please choose balanced cable and MIC to connect. Do not use the unbalanced ones.
MX SER IES 13- PAN/BAL This is the panorama control or balanced control. This control is used for stereo effect field of the signal. Set this control in middle position, signal levels of Channel L & R will be same. When the control is set to top stop, only Channel L receives the signal, Channel R can not. Vice versa. 14- PEAK LED This is clip LED indicator of mono level. When this LED illuminates, it means that PFL mono level is clipped.
MX SER IES 19- PAIR AND DISPLAY LED The buttom is used to control the Bluetooth player, and the LED is to display the working status of the Bluetooth player. A. After power on the mixer ,Bluetooth player enters standby mode, LED display: flashes twice every two seconds. B. Press and hold the PAIR button for 3 seconds the Bluetooth player into the Search mode and the LED continuous flashing.
MX SER IES MIC 1 CD PLAYER COMPUTER ACTIVE SPEAKERS 2TK 2TK MX 3BT 2TK BT HEADPHONE MAIN 2TK MX 3BT 2TK BT DAT MAIN 2TK DAT OR TAPE RECORDER Digital Mp3 Player+Recording MP3 USB REC VOL+ VOL- RPT SD/USB / Mp3 PLAYER
MX SER IES In-line Connection For XLR Connector For these applications the unit provides 1/4" TRS and XLR connectors to easily interface with most professional audio devices. Follow the configuration examples below for your particular connection. Pin2 (+) Pin3 (-) Pin1 ( ) XLR Type Balanced Balanced TIP RING SLEEVE SLEEVE RING TIP 3 3 1 1 2 2 1 3 2 TIP RING SLEEVE Tip Ring Sleeve Tip Ring Sleeve 1 2 3 1 2 3 Tip Ring Sleeve 1 2 3 Tip Ring Sleeve Tip Ring Sleeve 3.5mm to 3.
MX SER IES Block Diagram 11
MX SER IES 8 Type: Frequency Response 3 Channel USB MIXER Mic Input to any Output (Gain @ 0 dB,Rated output level) Mic Input to MAIN Output Distortion (Gain @ 0 dB,Rated output (THD&N) level @ 20 Hz-20 kHz bandwidth) Input: Channel INPUT MIC MIC EIN (Equivalent (Rs = 150 , Gain @ Max., Input Noise) 20 Hz-20 kHz bandwidth) Mic in to main out CMRR (Gain @ Max.,@ 1 kHz) Mono Channel Input Gain (20 Hz-20 kHz) Stereo Channel 10 Hz to 40 kHz(0, -1dB) 10 Hz to 100 kHz(0, -3dB) 0.
MX SER IES 8 MAIN OUT(all knob/fader @ 0 dBu, 22 Hz 22 kHz Filter, Gain @ unity) Main Mix knob/fader @ - , Main mix Noise Channel Level knob/fader @ (20 Hz-20 kHz) Main Mix knob/fader @ 0dB, Channel Level knob/fader @ - -120dBu(A-weighted) -100dBu(A-weighted) Main Mix knob/fader @ 0dB, Channel Level knob/fader @ 0dB -98dBu(A-weighted) Mono channels High 15 dB @12 kHz Low 15 dB @80 Hz PEAK Indicator Channel1 Main Left and Right (1-segment) VU Meters Microphone Input Line Input Tape Input Impedance Main Ou
MX SER IES 9
MX SER IES 10 15
2TK MX 3BT 2TK BT MAIN 2TK
