User Manual

1. LCD Screen
Display device information, such as device name, port number, preset etc.
1) Initial page
2. UP and DOWN buttons (PRESET and ENTER)
The two buttons can meet operation demands of LCD screen.
-UP: Click to list up.
-DOWN: Click to list down.
-PRESET: Its function is as following:
1) Enter Preset List
Hold to press this button for about 3 seconds to enter “Recall Preset” page, you can see
totally 32 presets, every preset can be set at PC, after finishing set, then save the preset, it
can be synchronously saved to DLM808.
2) Exit from Current Page
In“Recall Preset”page，hold to press PRESET button again for 3-4s, exit from current page
to initial page.
3) Indicate System Information
In initial page, hold to press PRESET button for 3-4s, you can see system information
showed on LCD screen. Such as system version(System V1.0), firmware version(Firmware
V1.0).
(1) Device name
(2) Current preset
(3) Current release version
(4) Current ID, when connecting with device, the ID can be obtained automatically.
(5) This image means the PC isn’t connecting with DLM808; if connecting well, the two devices
inside box will flash alternately.
(6) This image means DSP communicate well, if fault, it will show DSP!.
(7) This image appears when Dante option inserted in DLM808, or it will disappear.
2) Preset list
1
2
3
7
5
4
6
3
4
5 6 7
1
2
5
Function Buttons and LED Indicators
4