X X 8A/10A/12A/15A 8 10 X
X 2 X 15
X 11 X INDEX INTRODUCTION 4 HOOKUP DIAGRAMS QUICK START 5 RIGGING PANEL DESCRIPTION 6 7 8 FREQUENCY RESPONSE DIAGRAM 10 WIRE CONNECTIONS 12 13 TECHNICAL SPECIFICATIONS WARRANTY 15 * X 12A, X 15A are Active Speakers for professional use , they can be used in following electromagnetic environment: residential, commercial and light industrial, urban outdoors. They are the apparatusNot intended for rack mounting. * For X 12A, X 15A,the peak inrush current is 0.
X X Technical Specifications X X Model Active X 12A System Type Transducer Low Transducer High o o Horn Coverage H XV Frequency Response Crossover Frequency 2-Way Active Vented Speaker 12" Woofer, 2" Voice Coil 1" Neodymium Driver, 1" Voice Coil 90oH x 60oV 60Hz-20KHz (-6dB) 2100Hz 118dB Max.
X 10 X Technical Specifications Model Active System Type Transducer Low Transducer Driver o o Horn Coverage H XV Frequency Response Crossover Frequency Max SPL(1M) Power system Connector External Controls Electronic Protections Power Supply Enclosure Construction Mounting Dimensions (HxWxD) Net Weight X 8A 2-Way Active Vented Speaker 8" Woofer, 1.5"voice coil 1" Ferrite Twitter, 1" Voice Coil o o 90 H x 60 V 68Hz-20KHz (-6dB) 2000Hz 113dB Max.
X 5 X Quick Start Make all initial connections with all the equipments powered off, and ensure that all the main volume controls are turned completely down. 9 1). Connect one side of the signal cable at your audio mixer into output left / right (with Stereo- Jack or XLR) and the other side of the cable into the line input Stereo-Jack) of your active speaker cabinet. 2). Connect the power cord to mains. 3). Turn on your mixer first, then the active speaker cabinets. 4).
X X 8 Rigging X 12A The X series speaker cabinet also provides the suspension points for installation. (M10 1.5PH LENGTH: 30mm).
X 7 X 8 Panel Description AMP INTERFACE (1) BI-POLAR MAIN POWER SWITCH (2) AC POWER SOCKET WITH MAIN FUSE (3) LINE/MIC INPUT ON COMBO CONNECTOR (X 8A /10A ONLY LNE IN ) (4) MIX OUT ON XLR CONNECTOR (X 8A /10A ONLY LINK) (5) "INPUT SENSITIVITY" SWITCH FOR LINE & MIC (6) MAIN VOLUME CONTROL (7) CLIP INDICATOR RED LED (8) POWER INDICATOR GREEN LED (9) CONTOUR ON/OFF CONTOUR ON preset is to equalize the mix for optimal music play back (10) GROUND SWITCH X 8A (3) (5) (4) (6) (7) (8) (9) (10) X 10A Use o