Operation Manual

forward 10 songs, long press jump to next folder.
13. VOL: Volume control. During playback mode, brief press to activate EQ setting, rotate volume knob to choose each
preset EQ.
14. EQ: Press to turn sound effect ON/OFF, or choose different sound effect modes.
15. AUX: front AUX IN audio signal input.
16. Charger: Phone charger port.
17. USB/TF: USB and TF card input.
18. RST: press to reset the unit.
19. MIC: Micro phone.
20. IR: remote control sensor
Installation And Removing
Press the curving lock sheath of the unit, put the sheath into dashboard, and then push the unit into the sheath till it was
locked. But sure that the unit is installed in an appropriate situation, so that the drivers can control the car normally and
prevent the car from braking suddenly the passenger will be hurt.
Notice：
1. Before the unit installation, please check the power output and check that if the unit works normally.
2. Please use the accessory we offered only, or else beget needless breakage. If you need to alter the fabric of the car,
please call your seller.
Removing
Put the keys given into the keyholes on the two sides of the unit, until the lock is unlocked, then remove the unit with the
keys.
Maintenance
1. Make sure your car battery is a 12 volt (see the details in the host).
2. Please check the installation and wire if correct, after connecting all the wire, connect the power supply to the positive
of the battery.
3. Please use cramp or tape to make the head of wire is isolated from the metal of car.
4. Pease fix all the wire to avoid touch any offset objects.