AD Series: Quick Reference Guide Torbal Precision Scales Parts Counting Before using this reference guide, enable and configure Parts Counting by following the steps listed in Chapter 7.1.3 of the Instruction Manual. To enter the Parts Counting mode press the “F” key, and select the function by pressing the “T” key while “Parts” is displayed. 1. Place a container on the pan and tare it by pressing the “T’ key. 2. Confirm the sample size by pressing the “T (Yes)” key. 3.
AD Series: Quick Reference Guide 4. Press the “T (YES)” key to confirm and accept the sample weight. 5. Begin to fill the remainder of the pieces. For a detailed description of this feature please turn to Chapter 8(B) of the instruction manual. For technical questions or assistance please call toll free: 1-866-473-6900 Fulcrum Inc. 23 Carol Street. Clifton, NJ 07014 (973) 473-6900 http://www.torbal.
AD Series: Quick Reference Guide Totalizing Before using this reference guide, enable and configure Totalizing by following the steps listed in Chapter 7.1.3 of the Instruction Manual. To enter the Totalizing mode press the F key, and select the function by pressing the “T” key while “Totalize” is displayed. 1. Place a container on the pan and tare it by pressing the “T’ key. 2. Place the first object in the container located on the pan. Automatic The weight of the object will be added automatically.
AD Series: Quick Reference Guide Recall Total 3. Once a weight of an object has been added to the total, remove the object from the pan or press “T” to tare the scale. 4. After the scale has been tared, Steps 1 through 3 can be repeated in order to add more weighing results to the grand total. 5. To clear the grand total and reset the function press the “C” key. To Clear To Continue For a detailed description of this feature please turn to Chapter 8(F) of the instruction manual.
AD Series: Quick Reference Guide Animal Weighing Before using this reference guide, enable and configure Animal Weighing by following the steps listed in Chapter 7.13 of the Instruction Manual. To enter the Animal Weighing mode press the “F” key, and select the function by pressing the “T” key while “Animal” is displayed. 1. Place a container on the pan and tare it by pressing the “T’ key. 2. Place the animal into the container. Automatic and Semi Automatic modes Animal Weighing will begin automatically.
AD Series: Quick Reference Guide 4. After the time interval has elapsed the result will be displayed. 5. The animal can be removed from the pan Automatic mode: Result will be automatically cleared; the scale will perform an automatic tare. Manual and Semi Automatic modes: To clear the result, press the “C” key. After clearing the function press “T” to tare. To Clear To Tare For a detailed description of this feature please turn to Chapter X of the instruction manual.
AD Series: Quick Reference Guide Percent Weighing % Before using this reference guide, enable and configure Percent Weighing by following the steps listed in Chapter 7.1.3 of the Instruction Manual. To enter the Percent Weighing mode press the F key, and select the function by pressing the “T” key while “Percent” is displayed. 1. Place a container on the pan and tare it by pressing the “T” key. 2. The scale will display the weight of a previously stored sample.
AD Series: Quick Reference Guide 4. The weight of the sample will be displayed. Press the “T (YES)” key to confirm and accept the sample weight. 5. Remove the sample and place the object on the pan. The scale will express the weight of the object as a percentage of the stored sample. For a detailed description of this feature please turn to Chapter 8 of the instruction manual. For technical questions or assistance please call toll free: 1-866-473-6900 Fulcrum Inc. 23 Carol Street.
AD Series: Quick Reference Guide Check Weighing Before using this reference guide, enable and configure Check Weighing by following the steps listed in Chapter 7.1.3 of the Instruction Manual. To enter the Check Weighing mode press the “F” key, and select the function by pressing the “T” key while “Check” is displayed. 1. Upon entering the check weighing function, the UNDER limit is displayed. If an under limit has already been set and no change is necessary, press “T” (YES) to accept and continue.
AD Series: Quick Reference Guide 2. If an over limit has already been set and no change is necessary, press “T” (YES) to accept and continue. If you wish to change the setting, press the “0 (NO)” key. To set a new weight limit use the table shown in step1. To Accept To Change 3. Place a container on the pan and press “T” to tare. 4. To perform check weighing place your object on the pan to check whether the weight of the object falls within the designated range.
AD Series: Quick Reference Guide Display Hold Before using this reference guide, enable and configure Display Hold by following the steps listed in Chapter 7.1.3 of the Instruction Manual. To enter the Display Hold mode press the “F” key, and select the function by pressing the “T” key while “Display” is displayed. 1. Place a container on the pan and tare it by pressing the “T’ key. 2. Place the weight in the container located on the pan.
AD Series: Quick Reference Guide 3. Remove the weight from the pan. Automatic Semi-Automatic and Manual The result will be automatically cleared after the weight is removed from the pan. The scale will perform an automatic tare and prepare for the next weighing. To clear the weighing result press the “C” key. After the result has been cleared the scale must be tared. To tare the scale press the “T” key.