Owner's manual

- 21 -

6. A dashed line will be displayed indicating to manually enter the exact individual piece weight of

the counted parts. To manually enter the individual piece weight, use the following keys: the C key

to increment a digit, the T key to accept and go to the next digit, the key to insert a decimal,

and the MENU key to accept the entire setting.

To increment a digit To accept and go to

next digit

To insert a decimal To accept entered

value

7. Once the individual piece weight is entered and the MENU key pressed, the scale will display

“0pcs”. At any time proceed with the count.

8. Once an accurate count has been taken, the container and its contents may be removed from the

scale. To exit parts counting and return to basic weighing, select “PCS OFF” from the parts

counting menu.