User Manual

- 41 -
18.3. Recalling a previously stored tare value.
1. Press the MENU key, when the option “Tare” is displayed press the T key, and then select the option “Tar
On ” by press the T key once again.
2. The scale will begin to display tare locations. Locations marked with a dot in the upper left corner of the
LED have a stored tare value assigned. To select a tare location press the T key when a desired location is
displayed.
3. The scale will return to the weighing mode with the selected tare value in use.
tare tar on
tare 1