User guide

- 3 -
CAUTION:
• The scale is designed for indoor use only.
• Do not operate the scale in hazardous areas or conditions.
• Do not use the scale in locations subject to high humidity.
• Do not connect cables in ways other than those mentioned in this manual.
• Be sure to set the scale on a firm, stable, horizontal surface.
• Never stand on or lean upon this product. Equipment may fall or collapse, causing breakage
and possible injury.
• Before moving the product, unplug it and unplug all cables connected to it.
• When storing, transporting or returning the scale for service, always use the original
packaging.
WARNING:
• Never attempt to repair, disassemble or modify the scale yourself. Tampering with the scale
may result in injury and cause more damage to the equipment.
• Be sure to use the specified power source.
• Do not allow foreign matter to fall into the scale.
• If water or other liquid spills into the scale, do not continue to use it. Unplug the power cord
immediately and contact technical support.
1.1. Important handling Cautions and Warnings
Follow all safety guidelines in order to avoid electrical shock, or damage to
connected peripheral devices.
• All necessary repairs or internal adjustments should be made by authorized personnel only.
• To avoid the risk of fire use an outlet of the proper type that provides the specified voltage. The
required voltage for the power supply is 115vAC @ 60Hz and requires a minimum of 1.2 amperes
of current.
• Do not use the scale when the cover is open.
• Do not use the scale in explosive atmospheres.
• Do not use the scale in very high humidity.
• If the scale does not operate properly, unplug the power supply and do not use it until checked by
authorized personnel.
Disposal of electronic equipment in waste containers is
forbidden by law.
• Please dispose of electronic equipment in appropriate recycling centers or by
returning to the original point of purchase.