User's Manual

Instructions RCU

How to use the learning function in the control remote

Step 1: Press and hold the the 29 (

) button for 3 seconds until the red LED indicator lights

continuously, at which time the set-top box remote control enters the learning mode.

Step 2: After a few seconds, press the button for the “TV” area you want to learn. The remote control

will go into standby mode, waiting for a signal to be received to learn.

Step 3: Place the TV remote control and the remote control facing each other at a distance of

about 3 centimeters.

Step 4: Click on the TV remote control the button you want to teach. The indicator light will blink three

times and then turn on continuously. To learn the rest of the buttons in the “TV” area, you

must repeat steps 2, 3, 4.

Step 5: After the training of all the buttons on the "TV" area, press the 29 () button. The

indicator light should go off. The training was completed successfully.

Volume Channel

indicator

TV REMOTE CONTROL

3 cm

REMOTE CONTROL