PH550 Parts Cart This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888-448-6746, 8 a.m.- 5 p.m., PST, Monday-Friday. Distributed by Torin Jacks, Inc. 4355 E. Brickell St.
SAFETY INFORMATION Save these instructions. For your safety, read, understand, and follow the information provided with and on this product before using. The owner and/or operator of this equipment shall have an understanding of safe use/operating procedures before attempting to use. The owner and/or operator shall be aware that the use of this product may require special skills and knowledge.
ASSEMBLY INSTRUCTIONS 1. CONT. E D F I G H 2. ATTACH #4 TO #1 AS SHOW IN IMAGE ( J, K, L). USE (qty-2 EACH ASSEMBLY) #5, 6, 7, 8 TO SECURE VERTICAL STRUCTURAL RAILS. J K L 3. A. FIRST ATTACH #9 TO #4 PRESS DOWN FIRMLY AS SHOWN IN IMAGE ( M ). B. NEXT ATTACH #10 TO #9 PRESS DOWN FIRMLY AS SHOWN IN IMAGE ( M ).
ASSEMBLY INSTRUCTIONS 4. ATTACH #11 TO #4 AS SHOW IN IMAGE ( N, O, P ). USE (qty-8 EACH) #5, 6, 7, 8 TO SECURE THE CENTER SHELF AFTER YOU HAVE CHOSEN YOUR DESIGNATED HEIGHT CONFIGURATION. N O P 5. ATTACH #12 TO #4 STUCURAL RAILS AS SHOW IN IMAGE ( Q, Q1, R ). USE (qty-1 EACH ASSEMBLY) #6, 7, 8 TO SECURE THE FLOATING SHELF BRACKETS. ADJUST BRACKETS AS NEEDED AFTER SHELF HAS BEEN ATTACHED IN NEXT STEP. R Q Q1 6. ATTACH #13 TO #12 SHELF BRACKETS.
ASSEMBLY INSTRUCTIONS 7. ATTACH #14 TO #15 AUXILARY CASTER WHEEL ASSEMBLY. IMAGE ( W, X ) ATTACH #16 TO #15 SLIDE OUT STABALIZER BAR ONCE STABALIZER BAR IS ATTACHED TIGHTEN BOTH HANDLE KNOBS ON #15 TO SECURE. IMAGE ( X, Y, Z ) ATTACH #15 TO #1 SLIDE OUT SUPPORT RAIL ASSEMBLY ONCE SLIDE OUT SUPPORT RAIL ASSEMBLY HAS BEEN ATTACHED TIGHTEN BOTH HANDLE KNOBS UNDER #1 TO SECURE. IMAGE ( Y, Z, AA ) W X Y Z AA 8. COMPLETED UNIT. IMAGE ( AB, AC ).
WARRANTY ONE YEAR LIMITED WARRANTY For a period of one year from date of purchase, the manufacturer will repair or replace, at its option, without charge, any of its products which fail due to a defect in material or workmanship, or which fail to conform to any implied warranty not excluded hereby. Performance of any obligation under this warranty may be obtained by returning the warranted product, including dated purchase receipt, to the retailer or distributor where the product was purchased.
