User Manual

ManualsBrandsTorin ManualsAutomotiveHydraulic Low Profile Aluminum and Steel Racing Floor Jack with Dual Piston Quick Lift Pump, 1.5 Ton (3,000 lb) Capacity, Black

This is the Safety Alert Symbol. It is used to alert you to potential personal injury hazards.

Obey all safety messages that follow this symbol to avoid possible injury or death.

Read this Manual and follow all the Safety Rules and Operating Instructions

before using this product.

Distributed by TORIN JACKS INC. Ontario, CA 91761

Questions, problems, missing parts?

Before returning to your retailer, call our customer service

department at 1-888-448-6746, 8 a.m.- 5 p.m., PST, Monday-Friday.

K T815016LT

Operator’s Instruction Manual

1½ TON ALUMINUM / STEEL

RACING JACK

MODEL# T815016LT

Rated Capacity 3,000-lb

Summary of content (8 pages)

PAGE 1
Operator’s Instruction Manual 1½ TON ALUMINUM / STEEL RACING JACK Rated Capacity 3,000-lb MODEL# T815016LT This is the Safety Alert Symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Read this Manual and follow all the Safety Rules and Operating Instructions before using this product.
PAGE 2
OWNER / USER RESPONSIBILITY DO NOT OPERATE OR REPAIR THIS EQUIPMENT WITHOUR READING THIS MANUAL. To maintain the Service Jack and User Safety, the responsibility of the owner is to read and follow these instructions. Follow all installation and operation instructions. Inspect the service jack for proper operation and function. Read and follow the safety instructions. Keep Instructions readily available for equipment operators.
PAGE 3
SAFETY INFORMATION Study, understand and follow all instructions in this manual before operating the jack. Failure to heed these warnings may result in loss of load, damage to the jack and/or jack failure resulting in personal injury or property damage. * Position the Jack Training Position the jack to only lift on the areas of the vehicle as - Read this manual before use. Do not allow anyone who has not read this manual, and/or does not understand the requirements, use the jack.
PAGE 4
MAINTENANCE INSTRUCTIONS How the Jack Operates If you use and maintain your equipment properly, it will give you many years of service. Follow the maintenance instructions carefully to keep your equipment in good working condition. Never perform any maintenance on the equipment while it is under a load. With release valve closed, an upward stroke of the jack handle draws oil from the reservoir tank into the plunger cavity.
PAGE 5
ASSEMBLY INSTRUCTIONS PREPARATION Before Use 1. Prior to assembly carefully remove the block attached to the handle socket(picture 1). This piece it’s there for shipping purposes only and is not part of the jack. 1. Verify that the product and application are compatible, if in doubt call Customer Service. 2. Before use, read the operator’s manual completely and familiarize yourself thoroughly with the product, all components and recognize the potential hazards associated with its use. 3.
PAGE 6
SYSTEM AIR PURGE PROCEDURE DESCRIPTION IMPORTANT: BEFORE FIRST USE, Model T815016LT features a 3,000- lb. maximum capacity. The jack features an overlad valve bypass system to prevent jack damage and user injury. perform the following Air Purge Procedure to remove any air that may have been introduced into the hydraulic system as a result of product shipment and handling. This step is to be completed without and weight on the jack. Maximum Load Capacity........................1½ tons (3,000-lb.
PAGE 7
TROUBLESHOOTING JACK WILL NOT LIFT LOAD     JACK WILL NOT HOLD LOAD   JACK WILL NOT LOWER  POOR JACK LIFTING CAUSES AND SOLUTIONS Release valve is not completely closed. Turn handle clockwise.   Air is in the hydraulics. Purge air from system. Complete the airr purge procedure. Low oil level. Add oil as required. Lubricate moving parts.  Power unit malfunctioning. Replace the power unit. PARTS LIST Item Index No.
PAGE 8
WARRANTY ONE YEAR LIMITED WARRANTY Torin® has been producing quality automotive repair and maintenance products since 1968. All products are sold are felt to be of the highest quality and are covered by the following warranty: With proof of purchase for a period of one year from the date of that purchase, the manufacturer will repair or replace, at its discretion, without charge, any of its products or parts thereof which fail due to a defect in material or workmanship.