TORK MODELS E101B / E103B / E120B 24 HOUR DIGITAL TIME SWITCH READ INSTRUCTIONS CAREFUL LY B EFORE ATTEMPTING TO INSTALL TIME SWITCH. SEE WARNING ON FRONT PANEL – Failure to comply with instructions could result in personal injury and/or property damage. INSTALLATION: UNIT IS TO BE INSTALLED BY A LICENSED ELECTRICIAN 1. To remove unit from enclosure: Push the tab on right to swing unit the left and remove. 2. Mount the enclosure at eye level using screws or other suitable fastening device.
KEY FUNCTIONS: Unit should be program with AC power. Do not program on super cap back up power. Mode: Press to go to the next mode. Enter: Stores or saves current entry. DAY/YEAR: a. Press to set the year in the DATE mode. b. Selects the desired day of the week in the DST (Daylight Savings Time) mode. OVR: a. Press to change the load status in the AUTO (automatic) and the MAN (manual) mode. DEL/PREV: a. Press to delete the displayed entry. b. Decrement the last selected entry. HOUR/MONTH: a.
PROGRAMMING YOUR E101B / E103B / E120B NOTE: AFTER MAKING ANY CHANGES TO THE PROGRAM, PRESS MODE TO GO TO RUN MODE AND THEN PRESS EVENT TO UPDATE THE LOAD STATUS. AT POWER UP: When powering up the unit for the first time, 12:00 will flash on the display. NOTE: Allow 1-2 minutes for the supercap to charge before any display is shown. Press the MODE key to go to the CLK mode. After pressing the MODE key the display will show: MO TU WETH FR S A SU ASTRO CH1 M OM A M PMOFFSET CH2 CL K DATE SCH AUTO MAN 1.
Press MONTH, DATE, and YEAR key to advance to the desired Month, date and year, then press ENTER. NOTE: The day of the week will be automatically set once the date is set. 2.1 TO MODIFY DATE Press MODE until the display shows DATE. Press MONTH, DATE and YEAR to modify present settings and then press ENTER. 3.0 DAYLIGHT SAVING TIME After setting or modifying the date, display will show: ON OFF For standard USA daylight savings (DSt), press MODE then go to step 4.0.
3.1 TO MODIFY STANDARD USA DAYLIGHT SAVINGS DATES MO TU WE TH FR SA SU ASTRO Press MONTH and DATE, to modify S (starting) DST settings. NOTE: DATE will choose the week of the month to be assigned. Choices are 01 (1st), 02 (2nd), 03 (3rd) or L (Last) week of the month. The default day in SU (Sunday). Pressing DAY changes default day. EXAMPLE: 04:01 SU S represents the first Sunday in April.
4.1 SETTING HOURS AND MINUTES Press HOUR and MIN to set desired time. Press EVENT to set desired event (ON/OFF) and then press ENTER. The display will show: CLK DAT E SCH AUTO AN M Follow the same procedures above to set more schedule entries. 5.0 REVIEW, MODIFY AND DELETE Press MODE to advance to any of the following MODES: 1. CLOCK MODE: Press HOUR and MIN to modify existing settings. Press ENTER. 2. DATE MODE: Press MONTH, DATE and YEAR to modify existing settings. Press ENTER.
7.0 NOTES: 1. MAN mode: Under this mode the unit disregards the settings in the schedule mode and remains in its manually set status ON or OFF. NOTE: To resume regular schedule execution press the mode key to return to AUTO mode. 2. Unit will go to RUN MODE automatically (except on the MAN mode) if no key is pressed for five minutes. 3. Clear all memory.
NOTE: AFTER MAKING ANY CHANGES TO THE PROGRAM, PRESS MODE TO GO TO RUN MODE AND THEN PRESS EVENT TO UPDATE THE LOAD STATUS. Sch.
9
888.500.4598• www.nsiindustries.