Operator's Manual
&# & * )+&)
&# & # )+&)
&# & # )+&)
%!% Briggs & Stratton Vanguard, twin cylinder, 4
cycle, air cooled, 16 hp @ 3600 rpm, 35.90 cu. in. (588
cc) displacement, governed speed of 3200 rpm.
Mechanical fuel pump, large capacity dual element air
cleaner. 5-1/4 pint oil capacity.
,# '!+. 20 liter.
)+!&% )!- Eaton model 11 hydrostatic
transmission integrally coupled to a Peerless model
1310 axle. Travel speed range is 0-13.5Km/h (0-8.5
mph) forward and 4.8 Km/h reverse (0-3 mph).
&%+)&#* Foot-operated traction pedal.
Hand-operated throttle, choke, ignition switch, PTO
switch, lift lever, parking brake and seat adjustment.
,++!% )!- Constant tension belt drive system with
electric clutch utilizing poly-V belt from engine to
jackshaft and BX section V-belt drive from jackshaft to
each cutting unit.
!)* % #* Two 23 x 8.5-12 front-drive turf
tires with 4-ply construction. Rear tires for the
four-wheel configuration, 16 x 6.5-6 turf tires with
4-ply construction. Rear tire for the three wheel
configuration, 18 x 6.5-8 with 4-ply construction.
12-18 psi inflation pressure for all tires.
#+)!# +,)* 12-volt 255 cca at 180 C, 50 amp
reserve capacity at 270 C. battery16 amp alternator.
Seat switch, traction, PTO and parking brake interlock
switches, electrical leads provided for optional light
and hourmeter installations.
+)!% Pinion and gear sector with solid control link
to rear steer assembly, 2.5 turns lock to lock.
)"* Service braking accomplished through
dynamic characteristics of hydrostatic transmission.
Parking brake controls secondary shaft internal to the
axle assembly and is actuated by an overcenter control
lever.
!% )$ All steel welded construction utilizing
tubular and formed sheet metal sections
+ Standard cushion seat or deluxe suspension
seat with arm rest and weight adjustment is adjustable
fore and aft. Arm rest kit also available.
!+ .*+$ Category "0" A-Frame mounting system
connected to the tractor via parallel linkage. One
double-acting 60 mm bore 140 mm stroke hydraulic
cylinder receiving oil from hydrostatic transmission
charge pump via the control valve with float position.
Maximum operating pressure is 1000 psi. When the
traction unit is equipped with cutting units, all three
units are raised and lowered via the single control lever.
The lift system works in conjunction with the electric
clutch to engage and disengage the cutting units.
-)## !$%*!&%* % ! +
Wheel Tread Width 105.3 cm
Width Across Front Tires 132 cm
Wheel Base 138.5 cm
Overall Length w/ Cutting Units Installed 229 cm
Overall Height 119 cm
Tractor Weight 50.4 kg
Weight with 5-Blade Fixed Cutting Units 640 kg
Weight with 8-Blade Floating Culling Units 696 kg
Overall Width w/Fixed Head Units 195 cm
Overall Width w/Floating Head Units 203 cm
Transport Width w/Fixed Head Units 140 cm
Transport Width w/Floating Head Units 200 cm
'+!&%# (,!'$%+
L.H. 5 Blade Fixed Cutting Unit (2 req.)
Model No. 03434
R.H. 5 Blade Fixed Cutting Unit Model No. 03436
L.H. 8 Blade Floating Cutting Unit (2 req.)
Model No. 03437
R.H. 8 Blade Floating Cutting Unit Model No. 03439
Lift Arm Kit, Fixed Cutting Unit Model No. 02100
Lift Arm Kit, Floating Cutting Unit Model No. 02101
Rear Axle, 3 Wheel Model No. 02200
Rear Axle, 4 Wheel Model No. 02201
Full Roller Kit* Model No. 03440
Sectional Roller Kit* Model No. 03445
Wiehle Roller Kit* Model No. 03450
Skid Kit* Model No. 03446
Anti-Scalp Roller Kit* Model No. 03447
Grass Basket Kit, Floating C.U. Model No. 02302
Grass Basket Kit, Fixed C.U. Model No. 02304
Remote Hydraulics Kit Model No. 02300
Power Take-off Kit, 1:1 Ratio Model No. 02301
Power Take-off Kit, 1.5:1 Ratio Model No. 02303
Standard Seat Kit Model No. 30769
Deluxe Suspension Seat Kit Model No. 02305
Arm Rest Kit for Model 30769 Model No. 30707
Debris Blower Model No. 02202
Large Pulley Kit Part No. 98-5413
Hour Meter Kit Part No. 98-5411
Roller Scraper Kit* Part No. 60-9560
Comb Kit* Part No. 67-9400
Rear Weight Part No. 24-5790
Rear Weight (2) Part No. 24-5780
Gauge Bar Kit Part No. 13-8199
Backlap Kit Part No. 84-5510
Tire Chains Part No. 82531
*3 per kit