Operator's Manual

22
Vedligeholdelse
Maintenance Procedure Maintenance Interval & Service
✝Initial break in at 8 hours
‡Initial break in at 50 hours
De-carbon the combustion chamber
Torque head bolts and adjust valves
Change hydraulic fluid
‡Check engine RPM (idle and full throttle)
Change front axle oil
Replace the fuel filter cartridge
Maintenance Schedule
Replace moving hoses
Replace safety switches
Fuel tank—drain and flush
Hydraulic tank—drain and flush
✝ Change the enging oil filter
✝ Replace the hydraulic filter
Adjust the clutch
✝ Change the hydraulic fluid filter
Service the air filter cartridge
✝ Change engine oil
✝ Torque the wheel lug nuts
Check the fan belt
✝ Change the engine oil and filter
✝ Check the cutting unit’s belt tension
Check battery fluid/connections
Lubricate grease fittings
Service the air cleaner
Every
400
hours
Every
800
hours
Every
200
hours
Every
100
hours
Every
50
hours
Every
25
hours
Recommendations
Items are recommended every 1000 hours
or 2 years, whichever occurs first.
Daily Maintenance Checklist
✓ Safety Interlock Operation
✓ Brake Operation
✓ Engine Oil & Fuel Level
✓ Cooling System Fluid Level‘
✓ Air Cleaner
✓ Drain Water/Fuel Separator
✓ Clean Engine and Radiator
✓ Unusual Engine Noises
✓ Unusual Operating Noises
✓ Hydraulic System Oil Level
✓ Hydraulic Hoses for Damage
✓ Fluid Leaks
✓ Tire Pressure
✓ Instrument Operations
✓ Reel-to-Bedknife Adjustment
✓ Height-of-Cut Adjustment
✓ Cutting Unit Belt Adjustment
Lubricate all grease fittings
1
Touch up damaged paint
1
= Immediately after every washing, regardless of the
interval listed