Operator's Manual

6.Attachthethrottleassemblytotheoutsideofthe
handlebarandsecureitwithanutandapanscrew
(Figure5).
Figure5
2
FillingtheEnginewithOil
NoPartsRequired
Procedure
Important:Yourmachinedoesnotcomewithoilin
theengine.Beforestartingtheengine,lltheengine
withoil.
Max.ll:0.59l(20oz.),type:SAE30orSAE10W-30
detergentoilwithanAPIserviceclassicationofSF,SG,SH,
SJ,SL,orhigher.
1.Movethemachinetoalevelsurface.
2.Removethedipstick(Figure6).
1
2
3
g017332
Figure6
1.Theoillevelisatits
maximum.
3.Theoillevelistoo
low—addoiltothe
crankcase.
2.Theoillevelistoo
high—removeoilfrom
thecrankcase.
3.Slowlypouroilintotheoilllhole,wait3minutes,
andchecktheoillevelonthedipstickbywipingthe
dipstickcleanandtheninserting,butnotscrewingin,
theoilllcapintothehole(Figure7).
g017338
Figure7
Note:Filltheenginecrankcasewithoiluntilthe
dipstickindicatesthattheengineoilleveliscorrect
asshownin
Figure6.Ifyouoverlltheenginewith
oil,removetheexcessoilasdirectedinChangingthe
EngineOil.
4.Installthedipstickandhandtightenitsecurely.
Important: Change the engine oil after the r st 5
operating hour s ;changeityearlythereafter.Refer
toChangingtheEngineOil.
7