Operator's Manual

5.Tipthemachineontoitsside,withthedipstick
down,todraintheusedoiloutthroughtheoil
lltube.
6.Returnthemachinetotheoperatingposition.
7.Slowlypouroilintotheoilllhole,wait3
minutes,andchecktheoillevelonthedipstick
bywipingthedipstickcleanandtheninserting,
butnotscrewingin,theoilllcapintothehole.
Note:Max.ll:0.59l(20oz.),type:SAE30or
SAE10W-30detergentoilwithanAPIservice
classicationofSF ,SG,SH,SJ,SL,orhigher.
Note:Filltheenginecrankcasewithoiluntil
thedipstickindicatesthattheengineoillevelis
correctasshownin(Figure20).Ifyouoverll
theenginewithoil,removetheexcessoilas
directedin5.
g017332
Figure20
1.Theoillevelisatits
maximum.
3.Theoillevelistoo
low—addoiltothe
crankcase.
2.Theoillevelistoo
high—removeoilfrom
thecrankcase.
8.Installthedipstickandhandtightenitsecurely.
9.Disposeoftheusedoilproperlyatalocal
recyclingcenter.
ServicingtheSparkPlug
ServiceInterval:Every100hours
Checkthesparkplugafterevery100operatinghours.
UseanChampionRN9YCsparkplugorequivalent.
1.Stoptheengineandwaitforallmovingpartsto
stop.
2.Disconnectthewirefromthesparkplug.
3.Cleanaroundthesparkplug.
4.Removethesparkplugfromthecylinderhead.
Important:Replaceacracked,fouled,or
dirtysparkplug.Donotcleantheelectrodes
becausegritenteringthecylindercan
damagetheengine.
5.Setthegapontheplugto0.76mm(0.030inch)
(Figure21).
g000533
Figure21
1.Centerelectrodeinsulator
2.Sideelectrode
3.Airgap(nottoscale)
6.Installthesparkplugandthegasketseal.
7.Torquetheplugto20N-m(15ft-lb).
8.Connectthewiretothesparkplug.
ReplacingtheBlade
ServiceInterval:Yearly
Important:Youwillneedatorquewrenchto
installthebladesproperly.Ifyoudonothavea
torquewrenchorareuncomfortableperforming
thisprocedure,contactanAuthorizedService
Dealer.
Examinethebladeswheneveryourunoutofgasoline.
Ifthebladeisdamagedorcracked,replaceit
immediately.Ifthebladesedgesaredullornicked,
havethemsharpenedorreplaced.
WARNING
Thebladeissharp;contactingthebladecan
resultinseriouspersonalinjury.
•Disconnectthewirefromthesparkplug.
•Weargloveswhenservicingtheblade.
1.Disconnectthesparkplugwirefromthespark
plug.RefertoPreparingforMaintenance.
2.Tipthemachineontoitsside,withtheairlter
up.
3.Useablockofwoodtoholdthebladesteady.
4.Removetheblade(turnthebladebolt
counterclockwise),savingallthemounting
hardware.
15