Operator's Manual
g326888
Figure39
1.Center-electrodeinsulator
3.Insulator
2.Sideelectrode4.Airgap—0.76mm(0.030
inch)
5.Installthesparkplugandgasket.
6.Torquetheplugto20N∙m(15ft-lb).
7.Connectthewiretothesparkplug.
Storage
StorageSafety
•Shutofftheengine,removethekey(ifequipped),
andwaitforallmovementtostopbeforeyouleave
theoperator’sposition.Allowthemachinetocool
beforeadjusting,servicing,cleaning,orstoringit.
•Allowtheenginetocoolbeforestoringthemachine
inanyenclosure.
•Allowtheenginetocoolbeforestoringthemachine
inanyenclosure.
•Neverstorethemachineorfuelcontainerwhere
thereisanopename,spark,orpilotlight,such
asonawaterheateroronotherappliances.
•Removegrass,leaves,anddebrisfromthemufer
andenginecompartmenttohelppreventres.
PreparingtheMachinefor
Storage
WARNING
Fuelvaporscanexplode.
•Donotstorefuelmorethan30days.
•Donotstorethemachineinanenclosure
nearanopename.
•Allowtheenginetocoolbeforestoringit.
1.Onthelastrefuelingoftheyear,addfuel
stabilizertothefuelasdirectedbytheengine
manufacturer.
2.Runthemachineuntiltheengineshutsofffrom
runningoutoffuel.
3.Starttheengineagainandallowittorununtil
itshutsoff.Whenyoucannolongerstartthe
engine,thefuelsystemisempty.
4.Disconnectthewirefromthesparkplug.
5.Removethesparkplug,add30ml(1oz)
ofoilthroughthespark-plughole,andpull
therecoil-startergripslowlyseveraltimesto
distributeoilthroughoutthecylinder.
6.Installthesparkplugandtorqueitto20N∙m(15
ft-lb).
7.Checkthecuttingdiskforwearordamage.If
thecuttingdiskisdamagedorthetrimlineis
worn,replaceit.
8.Tightenallnuts,bolts,andscrews.
9.Storethemachineinacool,clean,dryplace.
22