Operator's Manual

1.20 1.20
Cutterhead Drive System
Drive Type: Hydraulic
Pump: Hydraulic gear type
Delivery Rate: 29.5 Litres per minute (6.5 UK gallons per minute)
Cutterhead Motors: Hydraulic gear type, reversible, pressure balanced with integral
differential pressure sensing relief check valve. Direct drive
Control: Tractor PTO drive. Automatic diverter valve safety cut-off
Relief Valve Setting: 250 bar (3625 psi) differential
Backlap facility: Interlocked lever control for reduced speed reverse rotation
Cutterhead Lift System
Drive Type: Hydraulic
Pump: Hydraulic gear type
Delivery Rate: 15 litres per minute (3.3 UK gallons per minute)
Cutterhead Manual
Lift Control: 3 ‘Independent’ remote control levers
1 ‘Override’ remote control lever
Cutterhead Electric
Lift Control: Electrohydraulic 3 ‘Independent’ remote control switches
1 ‘Override’ remote control switches
Relief Valve: 115 bar (1668 psi)
Weight Transfer: Variable hydraulic applied weight transfer acting on all cutterheads
Tractor
Minimum Power: 45 bhp (TM5490 / TM7490)
PTO: Rear 540 rpm 1.3/8” - 6 spline
Drawbar: Ring-hitch
SPECIFICATIONS