Operator's Manual
1.21 1.21
Running Gear
Tyres: 245/70 ‘General’
Tyre Pressure: 2.2 bar (32 psi)
Wheel Nut Torque Setting: 224Nm
Brakes: Drum type, cable operated, hydraulic controlled or optional mechanical
overrun brakes with integral lever operated handbrake
Maximum Speed: Road trafc regulations limit the maximum speed of these machines to
40 km/hr (25 mph) TM5490 / TM7490
Cutterheads
MK3 200 mm Cutterhead MK3 254 mm Cutterhead
Cutting Width: 762 mm (30˝) 762 mm (30˝)
Cylinder Diameter: 200 mm (8˝) 254 mm (10˝)
Cylinder Speed: 1000 rpm approx 1000 rpm approx
Height of Cut: 12 mm (0.5˝) to 80 mm (3˝) 12 mm (0.5˝) to 80 mm (3˝)
Number of Blades: 4, 6, 8, 10 4, 6
Smooth Rear Roller: Standard Standard
Smooth Front Roller: Optional -
Grooved Front Roller: Optional -
Conguration: Fixed / Floating* Fixed
* TM5490 Only
SPECIFICATIONS