Setup Instructions

5
SettingtheIdleSpeed
Partsneededforthisprocedure:
1
Screw(M5x50)
Procedure
TocomplywiththeEUNoiseDirective,thedealeris
requiredtoverifythecorrectenginespeedof2,900
rpmwhenthepowerunitisconnectedtoModels
02710and02711and3500rpmwhenthepowerunit
isconnectedtomodel02712.
2900/3500rpmistheunloadedenginerpm,adjusted
withthePTOoff(disengaged).T oleranceisplus0
rpm,minus50rpm.Theengineshouldbewarm;run
theenginefor15minutesbeforeadjusting.Double
checkthenalenginespeed.
1.Loosenthelocknutandunscrewthehighidle
screwafewturns.Whensettingtheengine
speedonpowerunitsconnectedtomodels
02710and02711,replacethehighidlescrew
withthehighidleM5x50screwsuppliedwith
02710and02711(Figure9).
g018377
Figure9
1.Speedcontrollever
3.Locknut
2.Cablescrew
4.Highidlescrew
2.Movethethrottlelever,ontheoperatorcontrol
panel,toobtainthedesiredenginerpm.
3.Turnthehighidlescrewsothattheendofitjust
touchesthespeedcontrollever,andtightenthe
locknut(Figure9).
4.Checkthehighidlespeedandrepeatthis
procedureifnecessary.
5.Loosenthecablescrewandadjustthecable
lengthsothatthethrottleleverontheoperator
controlpanelissettofullthrottlewhenthe
speedcontrollevertouchesthepreviouslyset
highidlescrew.
6.Tightenthecablescrew.
5