Operator's Manual

1.34 1.34
Ignition Key
0 = Engine off.
I = Engine run / Auxiliary on.
II = Engine pre-heat.
III = Engine start.
WARNING : PREVENT ACCIDENTS - Always remove the ignition key when the mower is not in use.
IMPORTANT: PREVENT DAMAGE - Always t the protective cap when the ignition key is removed
to prevent ingress of dirt and moisture from damaging the mechanism.
Engine Pre-Heat Indicator Light
Turn the ignition key to position II. The engine
pre-heat indicator light will illuminate. When the
correct pre-heat temperature is achieved, the indicator
light will switch off. When this condition is achieved,
turn the ignition key to position III to start the engine.
IMPORTANT: PREVENT DAMAGE - Attempting to start a cold engine before the pre-heat is used
can cause unnecessary wear to the battery.
Fuel Level Gauge
Displays fuel tank level.
Hour Meter
Displays engine running hours.
OPERATING THE MOWER
I
II
III
O
FUEL
E
F
D
3 4 5 5 9
E = Empty
F = Full