Operator's Manual

1.46 1.46
Engine
Refer to the ENGINE OPERATOR’S MANUAL
for maintenance information.
Running In Period
Check wheel nut torque settings:
During rst 50 hours of use and in addition to
routine checks. Refer to DAILY AND BEFORE
USE. Check wheel nut torques twice a day.
Front axle wheel nut torque setting - 200 Nm (148
lbf.ft).
Rear axle wheel nut torque setting - 54 Nm (40 lbf.
ft).
Running In Period - At First 50 Hours
Change the transmission oil lter: Unscrew and
remove the bottom of the transmission oil lter
housing. Withdraw the lter element and discard.
Ret a new lter element (Part no. 924709) and
replace the housing.
Change the hydraulic oil return lter:
Unscrew and remove the return lter canister
and discard. Ret a new lter canister (Part no.
924692).
MAINTENANCE
ENGINE
1
2
3
1. Transmission oil lter
2. Centre cutterhead
3. Hydraulic oil tank
1
2
1. Hydraulic oil return lter
2. Engine fuel lter