Operator's Manual

1.52 1.52
Every 50 Hours continued
Grease pivot points :
Clean and grease all grease points with a good
quality compound of the grade specied, refer to
SPECIFICATIONS.
Replace any grease nipples which are damaged.
Grease all cutterhead grease points and ensure
that sufcient grease is injected such that clean
grease is seen to escape from the roller end caps.
This provides visible evidence that the roller
seals have been purged of grass debris etc. and
will ensure maximum working life.
MAINTENANCE
DAILY
DAILY (IF FITTED)
50 HOUR (WEEKLY)
GREASE POINTS