Operator's Manual

Note:Ifthecuttingunitdriveswitchisinthe
ONposition,thecylinderdrivewilldisengage
whenthecuttingunitsareapproximately300
mm(11.8inches)abovegroundlevel.
3.Releasethelift-controlswitcheswhenthecutting
unitsareattherequiredheight.
Note:Thecontrolswitcheswillautomatically
returntoposition2andthearmsarehydraulically
lockedintoposition.
DualLiftConguration
Control
Thedualliftcongurationcontrolfunctionenablesthe
liftcontrolstobeusedinthefollowingways(Figure
27):
g029258
Figure27
1.5-gangmode
4.Centerliftlever
2.3/5-gangmode5.Rightliftlever
3.Leftliftlever
5-gangmode:
Theleftliftlevercontrolstheleftwingcuttingunit.
Thecenterliftlevercontrolstheleftfront,center,
andrightfrontcuttingunits.
Therightliftlevercontrolstherightwingcutting
unit.
3/5-gangmode:
Theleftliftlevercontrolstheleftwingandleftfront
cuttingunits.
Thecenterliftlevercontrolsthecentercuttingunit.
Therightliftlevercontrolstherightwingandright
frontcuttingunits.
3/5-gangmodewithleftandrightwingcutting
unitslockedintransportposition:
Theleftliftlevercontrolstheleftfrontcuttingunit.
Thecenterliftlevercontrolsthecentercuttingunit.
Therightliftlevercontrolstherightfrontcutting
unit.
EngagingtheCuttingUnit
Drive
g029235
Figure28
1.Forward3.Reverse
2.Off
Youcanengagethecuttingunitdriveonlywhen
youareseatedcorrectly,refertoUnderstandingthe
OperatorPresenceControls(page20).
Forwardrotationcuttingunitdriveengagement:
Pressthetopofthecuttingunitdriveswitchtothe
FORWARDposition.
WARNING
Onlyoperatetheforwardcuttingunitrotation,
oncethereelshavecompletelystopped,
otherwisemachinedamagecouldoccur.
Reverserotationcuttingunitdriveengagement:
Pressthebottomofthecuttingunitdriveswitchto
theREVERSEposition.
WARNING
Onlyoperatethereversecuttingunit
rotation,oncereelshavecompletelystopped,
otherwisemachinedamagecouldoccur.
Allcuttingunitdrivesdisengagement:Setthe
switchtothemiddleposition.
Tolowerthecuttingunit:Operatethelift-control
leverinadownwarddirection.Thecylinderwilldrive
whenthecuttingunitsareapproximately300mm
(11.8inches)abovegroundlevel.
24