Operator's Manual
1.26 1.26
Weight and Dimensions
Wheel Base: 1610 mm (63.4˝)
Working Width: 3610 mm (142.1˝) - At 100mm (4˝) height of cut
Cutting Width: 3500 mm (137.8˝) - At 100mm (4˝) height of cut
Transport Width: 1774 mm (69.8˝) - At 50mm (2˝) height of cut
Overall Length: 3470 mm (136.6˝)
Overall Height: 1750 mm (68.9˝) with R.O.P.S folded
2404 mm (94.6˝) with R.O.P.S in its vertical operating position
Working Weight: Including 2 post R.O.P.S, cutterdecks and full tank of fuel. It excludes the
operator and any other options.
1869 kg (4120 lb)
Recommended Lubricants and Hydraulic Fluids
Grease Points: A good quality medium grease
Engine: Refer to Engine Operators Manual
Hydraulic System:
Ambient Temperature Range
0 - 30 C (32 - 86 F) 15 - 40 C (59 - 104 F)
ISO viscosity grade
46 hydraulic oil
ISO viscosity grade
68 hydraulic oil
Should you be in any doubt please contact your TORO dealer. Using incorrect grades will cause premature wear
of hydraulic components and invalidate warranty.
Cutterdecks
Centre Cutterdeck Left/Right Cutterdeck
Cutterdeck Width: 1675 mm (65.9˝) 1150 mm (45.3˝)
Cutting Width: 1600 mm (63˝) 1090 mm (42.9˝)
Cutterblade Length: 558 mm (22˝) 558 mm (22˝)
Cutterblade Speed: 2400 rpm approx 2400 rpm approx
Cutterblade Overlap: 63 mm (2.5˝) 40 mm (1.6˝)
Height of Cut: 26 mm (1˝) to 127 mm (5˝) 26 mm (1˝) to 127 mm (5˝)
Number of Blades: 3 2
Conguration: Semi-oating Fully oating
Breakback Mechanism: - Gas spring
Tyres: Puncture preventative Puncture preventative
SPECIFICATIONS