Operator's Manual

3
ConvertingtheCutting
UnitfromLefttoRight
Conguration
NoPartsRequired
Procedure
1.Removetheprotectivecoveranddiscardit
(Figure2).
2.Removethesnapring(Figure2).
Note:Thesnapringisttedtothedriveend
only.
g028847
Figure2
1.Snapring
2.Protectivecover
3.RemovethecounterweightandO-ringand
installthemtothenon-driveend(Figure3).
g028848
Figure3
1.O-ring2.Counterweight
4.Tighteneachofthe2socket-headcapscrews
toatorqueof80N·m(59ft-lb).
5.Installthesnapringtothedriveend.
6.Repeattheprocedurefortheothercuttingunits.
4
AdjustingtheHand-Wheel
Assemblies
NoPartsRequired
Procedure
1.Removethenut,bolt,andwasherfromthe
alternativeholeposition(Figure4).
2.Removethe2nuts,2washers,springwasher,
andbearing-adjusterpinthatattachesthe
hand-wheelassemblytothecuttingunit,and
thenremovethehand-wheelassembly(Figure
4).
6