Operator's Manual

Issued: 21.01.13 Approved: Mod. No. 5078792 Sheet 3 of 10 Part No. 111-3991 (B)
SPECIFICATIONS
200MM VERSION 254MM VERSION
MODEL: 4 BLADE 6 BLADE 8 BLADE 10 BLADE 4 BLADE 6 BLADE 8 BLADE
MODEL NO:
02800 02801 02802 02803 02810 02811 02812
CYLINDER DRIVE:
Hydraulic motor
CUTTING WIDTH: 762mm (30”) 762mm (30”)
CYLINDER DIAMETER: 200mm (8”) 254mm (10”)
HEIGHT OF CUT: 12 - 80mm (0.5 - 3.15”) 12 - 80mm (0.5 - 3.15”)
SMOOTH REAR ROLLER:
Standard Standard
SMOOTH FRONT ROLLER:
Optional Not applicable
GROOVED FRONT ROLLER:
Optional Not applicable
CONFIGURATION:
Fixed (Floating head kit available) Fixed only
WEIGHT:
72Kg 75Kg 78Kg 81Kg 80.5Kg 83.5Kg 90Kg
DELIVERY CHECKLIST
Check that all parts are delivered correctly. Remove the cutterhead from the carton and check that all loose items have been
supplied correctly. Refer to the delivery checklist below. If any items are missing contact your local dealer.
Pin Pivot 65-05-120 1 0
Pin Pivot 65-05-127 0 1
DESCRIPTION PART NO. QTY QTY
200MM 254MM
Decals cont’d
WARNING - Cylinder cut adjustment
Part No: 214053
Location: On the front of the cutterhead
Fig 4
SAFETY PRECAUTIONS CONTINUED