Operator's Manual
Issued: 21.01.13 Approved: Mod. No. 5078792 Sheet 6 of 10 Part No. 111-3991 (B)
EC DECLARATION OF INCORPORATION
Manufactured by: HAYTER LIMITED,
declare that thelawnmower :
Model name:
Model No’s:
The above named units must not be put into service unless the power unit to which it is fitted has been declared in
conformity with the provisions of 2004/42/EC Essential Health & Safety Requirements relating to the Design and
Construction of Machinery and Safety Components and the regulations transposed into national law.
Authorised Signatory:
S.A Maryniak
(Technical Director)
Declaration done and technical documentation kept at:
HAYTER LIMITED
Spellbrook, Bishop’s Stortford,
Herts. CM23 4BU ENGLAND
Date: 12.04.10
Address: Spellbrook, Bishop s Stortford, Herts. CM23 4BU. ENGLAND
02800
MK3 Cutterheads
02801 02802 02803 02810 02811 02812
DECLARATION OF INCORPORATION
8. Immediately following the installation, it is essential that
all bearing housings are lled full of grease via the grease
nipples. Refer to Fig 5, item B.
This will require a signicant quantity of grease. We
recommend the use of B.P Keenomax L2 grease for long
life performance.
ASSEMBLING THE CUTTERHEAD