Installation Instructions

endthroughbracket(item11)andscrewonthe
secondlocknut(item16),leavengertight.
4.Connectbracket(item11)totheplate(item14)
usingsetscrew(item15),washer(item3)and
nylocnut(item19),leavengertight.
5.Repeatsteps2-5fortheotherendoftheroller.
6.Assemblethefrontrollerassemblytotheslotted
bracketsonthecuttingunitframeusingthe
screws(items1),washers(items2)andNyloc
nuts(items18),refertothepartslist.
7.Insertthescraperwire(item7)throughthesmall
holeinbothplates(items13and14)andthen
secureusingawasher(item5)andanut(item
17).
8.Afteradjustingtherollerforcorrectheight,
tightenallnutsandscrewstothefollowing
torquesettings:
•Item1-tightento45N⋅m(33ft-lb)
•Item9-tightento100N⋅m(74ft-lb)
•Items15and16-tightento70N⋅m(51.6
ft-lb)
9.Greasetherollergreasenipplesuntilgreaseis
expelledaroundtheendcaps.
Note:Tororecommendsananti-seizegrease
knownasBPKeenomaxL2.
10.Fixtheseriallabeladjacenttothecuttingunit
serialnumberlabel.
2