Installation Instructions

7.Locatethescraperbarscrew(item5)andpush
itthroughoneplate(item14),thenthroughthe
holeinthescraperbar(item7)andfastenwith
nut(item17)andwasher(item4).Repeatthis
procedurebutusetheslotinscraperbar(item
7).
8.Repeattheaboveprocedurefortheotherend
oftheroller.
9.Movethecompleteassemblyontothecutterbar
andxwithM10*25setscrews(item1),nuts
(item18)andwashers(item2).
10.Afteradjustingtherollertothecorrectheight,
tightenallnutstothefollowingtorquesettings:
•Item1-tightento45N⋅m(33ft-lb)
•Item9-tightento100N⋅m(74ft-lb)
•Item17-tightento10N⋅m(7.4ft-lb)
•Items16and19-tightento70N⋅m(51.6
ft-lb)
11.Greasetherollergreasenipplesuntilgreaseis
expelledaroundtheendcaps.
Note:Tororecommendsananti-seizegrease
knownasBPKeenomaxL2.
12.Fixtheseriallabeladjacenttothecuttingunit
serialnumberlabel.
PivotPlateFixing
Securetheboltintherearoatingslotposition(Figure
3).
g196847
Figure3
1.Bolt
AdjustingtheHeightofCut
Theheightofcutisgaugedbythepositionofthefront
andrearrollers.
1.Toalterthefrontrollerposition,slackenthe
lockingnut,thenreleaseandturntheadjusting
nutsbothendsclockwisetoincreasetheheight
ofcutorcounterclockwisetodecreasethe
heightofcut(Figure4andFigure5).
2.Ensurethatallcuttingunitsaresetatthesame
heightofcutbyreferringtotheindicatorrings
andusingtheheightofcutgaugeasshown
acrossthefullwidthofeachcuttingunit(Figure
4andFigure5).
3.Tightentheadjustingnutsandlockingnutson
bothends(Figure4).
g196848
Figure4
1.Nutassembly3.Lockingnut
2.Adjustingnuts
4.Heightofcut
=
g196849
Figure5
1.Heightofcut
2.Indicatorrings
Important:Whenchangingfromoatingcutting
unitstoxed,thefrontrollerassemblymustbe
removed.
4