Installation Instructions

RemovingtheBulkheadPanel
1.Ifaroadlightisinstalledonthemachine,
disconnectthe2pinconnectorfromthenumber
plate.
2.Removethe4bolts(6x25mm),4lockwashers
(6mm),and4atwashers(6mm)thatsecure
thebulkheadpaneltothechassisofthemachine
(Figure7).
g037067
Figure7
1.Bulkheadpanel3.Lockwasher
2.Flatwasher4.Bolt
3.Movethepanelupandforward,andremoveit
fromthemachine(Figure7).
InstallingtheKit
InstallingtheBrackets
ForMachinesWithoutCabsOnly
Note:Youcaninstallthebeaconlightoneitherside
oftheROPSframe.Ifyoudriveontheleftsideof
theroad,installthebeaconontherightsideifthe
machine.Ifyoudriveontherightsideoftheroad,
installthebeaconontheleftsideofthemachine.
1.EnsurethattheROPSpivotboltsandpinsare
inplaceandtight.
2.OnthesamesideoftheROPSonwhichyou
plantoinstallthekit,removethenutandbolt
fromtheROPSanddiscardthem;refertoFigure
8.
g344020
Figure8
1.Bolt(discard)3.Locknut(discard)
2.Lanyardwasher
3.AligntheholeintheROPSbracketwiththehole
intheROPSandinstallthenewbolt(Figure9).
g344021
Figure9
1.Largebolt3.Lanyardwasher
2.ROPSbracket
4.Largelocknut
4.Installthenewlargelocknutandtheexisting
lanyardwasher,andtightenthelocknut.
Note:Donotovertightenthem,asthiswill
maketheROPSdifculttofold.
5.Alignthesmallholesinthebeaconbracketwith
theupperholesintheROPSbracket(Figure
10),andsecurethebracketswith2bolts(M6x
20mm)and2locknuts(M6).
3