Installation Instructions

g345641
Figure10
1.Beaconbracket
3.Locknut(M6)
2.Bolt(M6x20mm)
InstallingtheBeacononaMachine
withoutaCab
1.Installthebeaconstandtothebeaconbracket
(Figure11).
g344042
Figure11
1.Beaconstand4.Ferrite
2.Seal
5.Beaconcable
3.Nut
2.Totthebeaconcable,startbyremovingthe
ttinginthetopofthebeaconstandandfeed
thebeaconcablethroughthebottomandout
throughthetop.
3.Connectthebeaconcable,ensuringthatthe
positive(yellow)wireisttedtothecentral
positiveterminalofthebeaconstandtting,and
theblackwiretotheouterterminal.Screwthe
ttingbackintothebeaconstand.
Note:Rotatethecableasyouscrewinthe
connector.Thispreventsthecablefrombeing
twisted.
4.Loosenthewingnutonthebeacon(Figure12).
g344043
Figure12
1.Wingnut
5.Assemblethebeaconontothetopofthebeacon
stand(Figure13).
4