Installation Instructions

Note:Retainthepressuretransducerfor
installationinInstallingtheBrakePressure
Transducer(page13).
g344080
Figure31
1.Reducertting(3/4x7/16
inch)
2.Brake-pressure
transducer
3.Removethereducertting(3/4x7/16inch)from
port-MBofthetractionpump(Figure32).
g344907
Figure32
1.Port-MB(tractionpump)3.Straighttting(3/8x3/4
inch)
2.Reducertting(3/4x7/16
inch)
4.Installthestraighttting(3/8x3/4inch)into
port-MBofthetractionpump(Figure32).
5.Torquethestraightttingto81N∙m(60ft-lb).
InstallingthePumpFitting
MachineswithouttheOptionalRoadLightKit
1.Attherightsideofthetransmissionpump,
removetheplugfromport-MBofthetraction
pump(Figure33andFigure34).
g343559
Figure33
g343556
Figure34
1.Port-MB(tractionpump)
3.Straighttting(3/8x3/4
inch)
2.Plug
2.Installthestraighttting(3/8x3/4inch)into
port-MBofthetractionpump(Figure34).
3.Torquethestraightttingto81N∙m(60ft-lb).
12