Installation Instructions

g344933
Figure39
1.Port-PS(fronttraction
manifold)
2.Hex-socketplug
3.Assembletheadaptertting(1/4x7/16inch)
intoport-PSofthefronttractionmanifold(Figure
40)withaseal(1/4inch).
g344935
Figure40
1.Adaptertting(1/4x7/16
inch)
3.Port-PS(fronttraction
manifold)
2.Seal(1/4inch)
4.Brake-pressure
transducer
4.Torquetheadapterttingto34to41N∙m(25
to30ft-lb).
5.Assemblethebrake-pressuretransducerinto
theadaptertting(Figure40).
6.Torquethetransducerto20N∙m(15ft-lb).
7.Plugthe3-pinconnectorlabeledBRAKE
PRESSURESENSORintothebrake-pressure
transducer(Figure41).
g344934
Figure41
1.Brake-pressure
transducer
2.3-pinconnector(labeled
BRAKEPRESSURE
SENSOR—machinewire
harness)
6
FinishingtheKitInstallation
NoPartsRequired
CheckingtheHydraulicFluid
Checkthehydraulicuidlevelinthetank—add
hydraulicuidasneeded;refertoCheckingthe
HydraulicFluidintheOperator’sManualforyour
machine.
ConnectingtheBattery
1.Assembletheterminalofthenegativebattery
cable(Figure42)ontothenegativebatterypost.
14