Installation Instructions

behindtheseat;refertoFigure23inConnectingthe
RelayandHarness(Model02750)(page9).
3.Connectthe2-bladeconnectorforthe
seat-air-suspensionintothe2-socketconnector
(blackandredwires)forthe350cm(137-3/4inches)
kitwireharness;refertoFigure24inConnectingthe
RelayandHarness(Model02750)(page9).
4.Routethewirearoundtheplatformpivot,andback
towardthecontrolpanelarea.
Note:Ensurethecableisroutedsothatitcannotget
crushedwhentheplatformislowered.
5.Workingunderthecontrolpanel,locatethe
parking-lampconnectorandremovethesocket
connectorfortheblackwirefromtheparking-lamp
connector(Figure26).
g037071
g037073
Figure26
6.Connectthesocketconnectorfortheblackwirethat
youremovedinstep5ontothebladeterminalofthe
piggy-backconnector(blackwire)oftherelayharness
(Figure26andFigure27).
g037074
Figure27
1.Controlpanel(parking
lamp)
6.Fuse(10A)
2.Parking-lampconnector7.2-socketconnector
(seat-air-suspension)
3.Piggy-back(black
wire—relayharness)
8.Kitwireharness—350cm
(137-3/4inches)
4.Socketterminal(red
wire—relayharness)
9.Socketconnector(black
wire—machineharness)
5.Fuseblocksocket(3rd
fromthetop)
7.Connectthepiggy-backconnectorontotheblade
terminaloftheparking-lampconnector(Figure27).
8.Atthebackofthefusebox,connectthesocket
terminal(redwire)oftherelayharness,ontotheblade
connectorofthefuseblockatthe3rdfuseposition
fromthetopofblock(Figure27).
9.Insertthefuse(10A)intothe3rdfusepositionfrom
thetopofthefuseblock(Figure27).
Note:Ensurethatthefuseisfullyseated.
10.Secureallcableswiththesuppliedcableties.
RemovingtheBulkheadPanel(Models
30651,30654,30657,and30659)
1.Removethe4bolts(6x25mm),4lockwashers(6mm),
and4atwashers(6mm)thatsecurethebulkhead
paneltothechassisofthemachine(Figure28).
11