Installation Instructions

6.Assemblethe2locknuts(8mm)and2washer(8x17
mm)atthe2rearcapscrewsbyhand(Figure15).
7.Fullyraisetheplatform.
8.Torquethelocknutsandcapscrewsto27N∙m(20
ft-lb).
AssemblingtheSeattothePlatform
(Models30651,30654,30657,and
30659)
1.Atthebottomplateofthenewseat,locatethe
seat-mountingholesforyourmachine(Figure16).
g036928
Figure16
Models30651,30654,30657,and30659
2.Assemble4capscrews(8x25mm),4washers(8x
17mm)totheholesintheangeofthebottomplate
thatyouidentiedinstep1.
g037029
Figure17
1.Capscrew(8x25mm)3.Flange(seat-bottomplate)
2.Washer(8x17mm)
3.Alignthe4capscrews(8x25mm)ofthenewseat
withtheholesintheoperatorsplatform(Figure18).
g037079
Figure18
1.Capscrew(8x25mm)3.Washer(8x17mm)
2.Operator’splatform4.Locknuts(8mm)
4.Assemble2locknuts(8mm)and2washers(8x17
mm)tothecapscrewsontheleftsideoftheseat.
5.Partiallyraisetheoperator’splatformtoaccessthe
threadsofthe2othercapscrews.
Important:Supporttheseattopreventitfalling.
6.Assemblethe2locknuts(8mm)and2washer(8x17
mm)totheother2capscrewsbyhand(Figure15).
7.Fullyraisetheplatform.
8.Torquethelocknutsandcapscrewsto27N∙m(20
ft-lb).
8