Installation Instructions

7.Removethehex-headbolt(8x10mm),couplinghexnut(8mm),andwasher(8mm)fromthetop
oftheseatarm(Figure19).
Retainthehex-headbolt(8x10mm),couplinghexnut(8mm),andwasher(8mm)forlaterinstallation.
g345727
Figure19
InstallingtheControlArmandSeatBelttotheNewAirRideSeat
1.Removethe3Phillips-headscrewssecuringtheseatcushionandremovetheseatcushion(Figure20).
Thisallowsaccesstosecurethecontrolarmtotheseat.
g344859
Figure20
2.Removetheplasticcoverfromtheleftside,loosenthebolt,andsecuretheseat-beltretainerusingthe
previouslyremovedbolt(Figure17).
ApplyLoctite
®
243totheboltandtorquetheboltto70to75N∙m(52to55ft-lb)andinstalltheplasticcover.
14