Operator's Manual

ManualsBrandsToro ManualsAttachmentsBlower and Tool Carrier Kit, CT Series Turf Mowers

Issued: 14.02.12 Approved: Mod. No. 5071851 Sheet 1 of 4 Part No. 111-3913 (B)

Spellbrook, Bishop’s Stortford, Herts. CM23 4BU, England.

Telephone: 01279 723444 Fax: 01279 723821

E-mail: hayter.sales@toro.com / uk.service@toro.com Web: www.toro.com / www.hayter.co.uk

This kit provides a carrier bracket for transporting leaf blowers.

This kit should be ﬁtted to the listed machines only.

These instructions include safety, speciﬁcations, operating instructions and assembly.

These instructions should be considered as part of the machine.

For all other information refer to your Operator’s Manual and Parts List.

In pursuit of continuous product development, TORO reserve the right to alter speciﬁcations without notice.

Left and Right : Throughout this manual refers to the mower when looking in the direction of forward travel.

INTRODUCTION

FITTING, OPERATION INSTRUCTION SHEET & PARTS LIST

BLOWER/TOOL CARRIER KIT MODEL 02903

For CT2120, CT2140, LT3340 & GM3400

Models 30655, 30656, 30657 & 30651

ORIGINAL VERSION (EN)

FROM SERIAL NO 312000001

Contents Page No.

Introduction 1

Safety precautions 2

Speciﬁcations 2

Delivery checklist 2

Delivery checlist exploded view 3

Fittings instructions 3

Operating instructions 3

Warranty 4

CONTENTS

Summary of content (4 pages)

PAGE 1
Spellbrook, Bishop’s Stortford, Herts. CM23 4BU, England. Telephone: 01279 723444 Fax: 01279 723821 E-mail: hayter.sales@toro.com / uk.service@toro.com Web: www.toro.com / www.hayter.co.uk FITTING, OPERATION INSTRUCTION SHEET & PARTS LIST BLOWER/TOOL CARRIER KIT MODEL 02903 For CT2120, CT2140, LT3340 & GM3400 Models 30655, 30656, 30657 & 30651 ORIGINAL VERSION (EN) FROM SERIAL NO 312000001 CONTENTS Contents Page No.
PAGE 2
SAFETY PRECAUTIONS THIS SYMBOL MEANS BE ALERT! YOUR SAFETY IS INVOLVED. EXERCISE GREAT CARE AND FOLLOW THE ADVICE GIVEN TO AVOID POTENTIAL HAZARDOUS SITUATIONS Before working on the machine it is essential that you read and understand the Safety Precautions as shown in the Operator’s Manual. Before working on the machine it is essential that : - The engine is switched off. - The parking brake is applied. - There is no pressure in the hydraulic system. - The cutterheads are fully down on the ground.
PAGE 3
DELIVERY CHECKLIST EXPLODED VIEW Fig 1 4 2 4 42 42 2 5 2 1 2 3 2 3 2 3 5 3 FITTING INSTRUCTIONS The blower carrier (item 1) fits to the right side of the chassis just behind the exhaust silencer. Refer to Fig 2. 1. Align the four holes in the blower carrier (item 1) with the four holes in the chassis. Refer to Fig 1. 2. Place the setscrews (item 3) through the holes with a washer (item 2) under the head. Refer to Fig 1. 3.
PAGE 4
WARRANTY The Toro Total Coverage Guarantee A Limited Warranty • Conditions and Products Covered Toro® The Company and its affiliate, Toro Warranty Company, pursuant to an agreement between them, jointly warrant your Toro Commercial product (“Product”) to be free from defects in materials or workmanship for two years or 1500 operational hours*, whichever occurs first. This warranty is applicable to all products with the exception of Aerators (refer to separate warranty statements for these products).