Operator's Manual

ManualsBrandsToro ManualsAttachmentsLimited Slip Differential Lock Kit, CT Series Turf Mowers

Issued: 20.02.12 Approved: Mod. No. 5071851 Sheet 1 of 4 Part No. 111-3767 (B)

Spellbrook, Bishop’s Stortford, Herts. CM23 4BU, England.

Telephone: 01279 723444 Fax: 01279 723821

E-mail: hayter.sales@toro.com / uk.service@toro.com Web: www.toro.com / www.hayter.co.uk

This kit provides a limited slip differential to improve traction when tyre grip is reduced in certain ground conditions.

This is suitable for the listed machines only.

These instructions include safety, speciﬁcations, operating instructions and assembly.

These instructions should be considered as part of the machine.

For all other information refer to your Operator’s Manual and Parts List.

In pursuit of continuous product development, TORO reserve the right to alter speciﬁcations without notice.

Left and Right: Throughout this manual refers to the mower when looking in the direction of forward travel.

FITTING AND OPERATION INSTRUCTION SHEET

LIMITED SLIP DIFFERENTIAL KIT (MODEL 02904)

FOR CT2120 (MODEL 30655), CT2140 (MODEL 30656) AND GM3400 (30651)

ORIGINAL VERSION (EN)

FROM SERIAL NO 312000001

INTRODUCTION

SAFETY PRECAUTIONS

Before working on the machine it is essential that you read and understand the Safety Precautions as shown in

the Operator’s Manual.

Before working on the machine it is essential that :

- The engine is switched off.

- The parking brake is applied.

- There is no pressure in the hydraulic system.

- The cutterheads are fully down on the ground.

WARNING: PREVENT ACCIDENTS - When drilling or carrying out other operations always wear eye

protection.

WARNING: PREVENT ACCIDENTS - Before working on the machines electrical systems ALWAYS disconnect

the battery terminals and ensure no contact is made between the terminals and the machines metalwork.

WARNING: ALWAYS SEEK PROFESSIONAL ADVICE FROM YOUR LOCAL AUTHORISED DEALER IF,

AFTER STUDYING THIS, YOU ARE UNSURE HOW TO FIT THIS KIT.

THIS SYMBOL MEANS BE ALERT! YOUR SAFETY IS INVOLVED.

EXERCISE GREAT CARE AND FOLLOW THE ADVICE GIVEN TO AVOID POTENTIAL

HAZARDOUS SITUATIONS

Summary of content (4 pages)

PAGE 1
Spellbrook, Bishop’s Stortford, Herts. CM23 4BU, England. Telephone: 01279 723444 Fax: 01279 723821 E-mail: hayter.sales@toro.com / uk.service@toro.com Web: www.toro.com / www.hayter.co.
PAGE 2
SPECIFICATIONS Weight: 0.35Kg DELIVERY CHECK LIST ITEM NO. 1 2 DESCRIPTION PART NO. LIMITED SLIP DIFFERENTIAL VALVE SERIAL LABEL 111-3753 111-3874 QTY. NOTE 1 1 DELIVERY CHECKLIST EXPLODED VIEW Fig 1 1 FITTING INSTRUCTIONS 1. The valve has to be fitted in the transmission manifold situated under the operator platform. 2. Ensure the engine is switched off and the ignition key is removed. Remove both battery terminals, ensuring that the negative terminal is removed first. 3.
PAGE 3
FITTING INSTRUCTIONS Continued 11. Fix the serial label adjacent to the machine serial label. OPERATING INSTRUCTIONS This limited slip difflock valve is automatic in operation, it prevents one front wheel rotating considerably faster than the other. As the GM3400 and CT2140 has a 4 wheel drive on demand transmission system, any front wheel slip will engage drive to the rear wheels. NOTES Issued: 20.02.12 Approved: Mod. No. 5071851 Sheet 3 of 4 Part No.
PAGE 4
WARRANTY The Toro Total Coverage Guarantee A Limited Warranty • Conditions and Products Covered Toro® The Company and its affiliate, Toro Warranty Company, pursuant to an agreement between them, jointly warrant your Toro Commercial product (“Product”) to be free from defects in materials or workmanship for two years or 1500 operational hours*, whichever occurs first. This warranty is applicable to all products with the exception of Aerators (refer to separate warranty statements for these products).