Operator's Manual

Issued: 10.02.12 Approved: Mod. No. 5071851 Sheet 1 of 4 Part No. 111-3773 (B)
Spellbrook, Bishop’s Stortford, Herts. CM23 4BU, England.
Telephone: [phone] Fax: [phone]
E-mail: [e-mail] / [e-mail] Web: www.toro.com / www.hayter.co.uk
This kit provides assistance to reduce the effort required to lower and to raise the standard ROPS by hand.
It consists of two gas springs that can be fitted to lugs already provided on the standard ROPS.
This kit is suitable for the listed machines only.
These instructions include safety, maintenance, specifications, operating instructions and assembly. These instructions
should be considered as part of the machine.
For all other information refer to your Operator’s Manual and Parts List.
In pursuit of continuous product development, TORO reserve the right to alter specifications without notice.
Left and Right : Throughout this manual refers to the mower when looking in the direction of forward travel.
INTRODUCTION
FITTING AND OPERATION INSTRUCTION SHEET
ROPS ASSIST KIT (MODEL 02905)
For CT2120, CT2140, LT3340 & GM3400
Models 30655, 30656, 30657 & 30651
ORIGINAL VERSION (EN)
FROM SERIAL NO 312000001
CONTENTS
Contents Page No.
Introduction 1
Safety Precautions 2
Specifications 2
Delivery Checklist 2
Fitting Instructions 3
Operating Instructions 3
Warranty 4