Operator's Manual

Issued: 10.02.12 Approved: Mod. No. 5071851 Sheet 2 of 4 Part No. 111-3773 (B)
ITEM NO. DESCRIPTION PART NO. QTY. NOTE
SPECIFICATIONS
1 GAS STRUT ROPS 111-3464 2
2 SETSCREW M8*25 03162 4
3 NUT M8 NYL INSERT T TYPE 09441 4
4 SERIAL NUMBER PLATE 111-3920 1
Weight: 0.5Kg
DELIVERY CHECK LIST
SAFETY PRECAUTIONS
Before working on the machine it is essential that you read and understand the Safety Precautions as shown in
the Operator’s Manual.
Before working on the machine it is essential that :
- The engine is switched off.
- The parking brake is applied.
- There is no pressure in the hydraulic system.
- The cutterheads are fully down on the ground.
WARNING: PREVENT ACCIDENTS - When drilling or carrying out other operations always wear eye
protection.
WARNING: PREVENT ACCIDENTS - Before working on the machines electrical systems ALWAYS disconnect
the battery terminals and ensure no contact is made between the terminals and the machines metalwork.
WARNING: ALWAYS SEEK PROFESSIONAL ADVICE FROM YOUR LOCAL AUTHORISED DEALER IF,
AFTER STUDYING THIS, YOU ARE UNSURE HOW TO FIT THIS KIT.
THIS SYMBOL MEANS BE ALERT! YOUR SAFETY IS INVOLVED.
EXERCISE GREAT CARE AND FOLLOW THE ADVICE GIVEN TO AVOID POTENTIAL
HAZARDOUS SITUATIONS