Operator's Manual

ManualsBrandsToro ManualsAttachmentsTool Box Kit, CT/LT Series Turf Mowers

Issued: 09.02.12 Approved: Mod. No. 5071851 Sheet 1 of 4 Part No. 111-3916 (B)

Spellbrook, Bishop’s Stortford, Herts. CM23 4BU, England.

Telephone: 01279 723444 Fax: 01279 723821

E-mail: hayter.sales@toro.com / uk.service@toro.com Web: www.toro.com / www.hayter.co.uk

FITTING AND OPERATION INSTRUCTION SHEET

TOOLBOX KIT MODEL 02907

For CT2120, CT2140, LT3340 & GM3400

Models 30655, 30656, 30657 & 30651

ORIGINAL VERSION (EN)

FROM SERIAL NO 312000001

This kit provides a toolbox for the operator to carry various tools.

This kit should be ﬁtted to the listed machines only.

This instruction sheet should be regarded as part of the machine, as it gives essential information regarding machine

safety, speciﬁcations, assembly and warranty.

For all other information refer to your Operator’s Manual and Parts List.

In pursuit of continuous product development, TORO reserve the right to alter speciﬁcations without notice.

Left and Right : Throughout this manual refers to the mower when looking in the direction of forward travel.

INTRODUCTION

Contents Page No.

Introduction 1

Safety precautions 2

Speciﬁcations 2

Delivery checklist 2

Delivery checklist exploded view 3

Fittings instructions 3

Warranty 4

CONTENTS

Summary of content (4 pages)

PAGE 1
Spellbrook, Bishop’s Stortford, Herts. CM23 4BU, England. Telephone: 01279 723444 Fax: 01279 723821 E-mail: hayter.sales@toro.com / uk.service@toro.com Web: www.toro.com / www.hayter.co.uk FITTING AND OPERATION INSTRUCTION SHEET TOOLBOX KIT MODEL 02907 For CT2120, CT2140, LT3340 & GM3400 Models 30655, 30656, 30657 & 30651 ORIGINAL VERSION (EN) FROM SERIAL NO 312000001 CONTENTS Contents Page No.
PAGE 2
SAFETY PRECAUTIONS THIS SYMBOL MEANS BE ALERT! YOUR SAFETY IS INVOLVED. EXERCISE GREAT CARE AND FOLLOW THE ADVICE GIVEN TO AVOID POTENTIAL HAZARDOUS SITUATIONS Before working on the machine it is essential that you read and understand the Safety Precautions as shown in the Operator’s Manual. Before working on the machine it is essential that : - The engine is switched off. - The parking brake is applied. - There is no pressure in the hydraulic system. - The cutterheads are fully down on the ground.
PAGE 3
DELIVERY CHECKLIST EXPLODED VIEW Fig 1 3 4 3 5 3 2 5 3 1 3 4 3 4 2 3 34 FITTING INSTRUCTIONS The toolbox is fitted under the engine cover on the left side of the machine, between the bulkhead and radiator bracket. Refer to Fig 1. 1. Bolt the two brackets (item 2) in place. Refer to Fig 1. 2. Bolt the toolbox to the brackets. Refer to Fig 1. 3. Ensure the toolbox is level and the engine cover can be closed. If not, adjust the toolbox height to suit. 4.
PAGE 4
WARRANTY The Toro Total Coverage Guarantee A Limited Warranty • Conditions and Products Covered Toro® The Company and its affiliate, Toro Warranty Company, pursuant to an agreement between them, jointly warrant your Toro Commercial product (“Product”) to be free from defects in materials or workmanship for two years or 1500 operational hours*, whichever occurs first. This warranty is applicable to all products with the exception of Aerators (refer to separate warranty statements for these products).