Installation Instructions

FormNo.3410-891RevA

KevlarTiresKit

CT,LT,LT-F,andGM3400SeriesTurfMowers

ModelNo.02912

ModelNo.02914

InstallationInstructions

Note:KitModel02912isforthetractionunitsCT2240andkitModel02914isforthetractionunitsLT3340,LT-F3000,

andGM3400.

WARNING

CALIFORNIA

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato

causecancer,birthdefects,orreproductiveharm.

PreparingtheMachine

Parkthemachineonalevelsurface,lowerthecuttingunits,shutofftheengine,engagetheparkingbrake,andremove

thekeyfromthekeyswitch.

RemovingtheCurrentTires

1.Loosenthewheelnuts.

2.Raisethemower;refertotheOperator’sManual.

3.Removethetires.

g197207

Figure1

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3410-891*A

PAGE 1
Form No. 3410-891 Rev A Kevlar Tires Kit CT, LT, LT-F, and GM 3400 Series Turf Mowers Model No. 02912 Model No. 02914 Installation Instructions Note: Kit Model 02912 is for the traction units CT2240 and kit Model 02914 is for the traction units LT3340, LT-F3000, and GM3400. WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm.
PAGE 2
Installing the New Tires 1. Install the new tires onto the machine. 2. Secure the tires with the wheel nuts. 3. Lower the mower. 4. Tighten the nuts on the front tire assembly to 200 N∙m (147.5 ft-lb). 5. Tighten the nuts on the rear tire assembly to 54 N∙m (40 ft-lb). 6. Verify that the tire pressure matches the recommended pressure in the Operator's Manual.