Installation Instructions

6.Pushthecableterminalsintotheplasticconnector
(Figure11).
g028938
Figure11
1.Blackwire2.Redwire
7.Connectthenumberplatelighttotheconnectorleads.
RefertoFigure5).
8.Connecttheotherendoftheconnectorleadtothe
mainloomconnector,locatedontheelectricalmount
panel.
9.Plugtheasherrelayintothevacantrelaysocket
locatedontherightsideoftheelectricalmountpanel.
InstallingthePressureSwitch
Note:Thepressureswitchcontrolsthebrakelights.
1.Models30654,30655,and30656:Locatethe3hose
connectionsontherightsideofthetransmission
pump.Thelowerfrontconnectiontothepump
hasateettingwithablankingcap(Figure12).
Model30657:Locatetherearfaceofthetransmission
manifold.Thereisaport,marked“PS”,ttedwithan
adapterandablankingcaporaplug(Figure13).
g028943
Figure12
Models30654,30655,and30656
1.Blankingcap5.Pressure-switchadapter
2.Transmissionpump6.Pressureswitch
3.Teetting
7.Pressure-switchconnector
4.Dowtyseal
g194895
Figure13
Model30657
1.Transmissionmanifold
4.Pressure-switchconnector
2.“PS”portwithadaptor(if
tted)
5.Blankingcap/blanking
plug
3.Pressureswitch
2.Models30654,30655,and30656:Removethe
blankingcapandattachthepressure-switch
adapterusingadowtyseal(Figure12).
Model30657:Removetheplug/adaptoranddowty
fromthe“PS”port(Figure13).
3.Attachthepressureswitchandtorqueto34N∙m(25
ft-lb;Figure12orFigure13).
4.Attachthepressure-switchconnectortothemain
wiringloom.
6