Installation Instructions

g018244
1
Figure5
1.Fuse,15amp(2)
3
InstallingthePressureSwitch
Partsneededforthisprocedure:
1
Dowtyseal,1/4inch
1Pressureswitchadapter
1Pressureswitch
1Pressureswitchcable
Procedure
Thepressureswitchcontrolsthebrakelights.Theswitchis
screwedintothemaintransmissionline.
1.Locatethethreehoseconnectionsontherightsideof
thetransmissionpump.Thelowerfrontconnectionto
thepumphasateettingwithablankingcap.
2.Removethisblankingcapfromtheteetting.
3.Screwthepressureswitchadapterintotheteetting
usinga1/4inchdowtyseal(Figure6).
g018247
1
2
3
Figure6
1.Dowtyseal,1/4inch
3.Pressureswitch
2.Pressureswitchadapter
4.Screwthepressureswitchintothisadapter(Figure6).
Torquetheswitchto34N-m(25ft-lbs).
5.Workingontheelectricalbulkhead,plugthe3-pin
connectoroftheelectricalpressureswitchcabletothe
correspondingconnectorlocatedonthemainwiring
harnessofthemachine(Figure4andFigure7).
Figure7
ConnectorsasViewedfromtheCableEntrySide
1.Green/Yellow
5.Blue
2.Yellow6.Pressureswitch
connector,mainwiring
harness
3.Black7.Pressureswitchcable
connector
4.Brown
6.Runtheelectricalpressureswitchcablefromthe
electricalbulkhead,downtherightROPSpostforward
alongthechassisrailtothepressureswitch.
7.Plugtheconnectorintothepressureswitchandsecure
it.
4